Embroidered THAILAND COUNTRY FLAG l Iron-On Patch l Sew-on Badge l Muay Thai l Boxing l Any Cloth Decorating

Embroidered THAILAND COUNTRY FLAG l Iron-On Patch l Sew-on Badge l Muay Thai l Boxing l Any Cloth Decorating


Patch dimensions: 8 cm. x 5 cm.


Step-by-Step Instructions:

1. Prepare the Fabric and Patch
Wash and dry the clothing item to remove any dirt or residue. Iron-on patches work best on clean, dry fabric.

Position the patch on the desired spot of the clothing. Make sure it is straight and centered.

2. Set the Iron to the Correct Temperature
Set your iron to a medium-high heat (around 400°F or 200°C). Turn off the steam function, as steam can interfere with the adhesive.

3. Protect the Fabric
Place a thin cloth (like a handkerchief or towel) over the patch. This helps protect both the patch and the fabric from direct heat and prevents burning.

4. Iron the Patch
Press the iron firmly onto the patch, applying even pressure for 30-45 seconds. Make sure to press down steadily and don’t move the iron around, as this can shift the patch.

For a larger patch, you may need to move the iron slightly to ensure the entire patch gets heat. Make sure you’re applying enough pressure to make sure the adhesive sticks well.

5. Allow the Patch to Cool
After applying heat, carefully remove the iron and let the patch cool for a few minutes.

Once cool, check the edges of the patch to ensure it’s fully adhered. If any edges are lifting, you can repeat the process with a little more heat and pressure.

6. Test the Adhesion
Gently test the edges of the patch by trying to peel them up. If they’re secure, you’re all done! If any part of the patch is still loose, you can repeat the ironing process.

7. Let It Set
Once the patch is securely attached, avoid washing the clothing item for at least 24 hours to let the adhesive set properly.

8. For permanent.
Sew the patch on your clothes.

Tips:
Avoid using too much heat or steam, as this can damage the fabric or the patch.

If the patch is large or has intricate details, consider repeating the process in sections.

Some patches may have instructions specific to the material or type of patch, so it’s a good idea to check those before proceeding.

By following these steps, your arm patch should be securely attached and ready to wear!